Dr. Ajith B. S

Areas of Interest

No areas of interest listed.

Ph.D. SUPERVISION

Awards / Grants

• 1. Received “Best Paper Presentation award” in 16 th Kannada Vijnana Sammelana held at Mangalore University, Mangala Gangothri, Mangaluru during 15 to 17, September, 2021 organised by Swadeshi Vijnana Andolana, Karnataka.
• 2. Awarded with “Best Guide Award-Tech vision 2017”
• 3. Guided the student project which is awarded with "Best Project of the Year" form Karnataka State Council for Science and Technology (KSCST) 2021-22 (45th series).
• 4. Guided the student project which is awarded with “Best Project of the Year” form Karnataka State Council for Science and Technology (KSCST) 2019-20 (43rd series).
• 5. Guided the student project which is awarded with “Best Project” Award in the 6th National Level IEEE Project Competition-2022 held at GSSS Institute of Engineering and Technology for Women, Mysuru, organized by IEEE Student Branch in Association with IEEE Bangalore section and IEEE Mysore Subsection on 8th June 2022.
• 6. Guided the student project which received First Place (Trophy with Rs. 10,000 Cash Prize) at SPICE-2022 (A part of International Cultural Jamboree) held at Alvas Campus, Vidyagiri, Moodubidire on 24th December 2022.
• 7. Guided the student project which received First Place (Trophy with Rs. 20,000 Cash Prize) in 3rd South India Project Exhibition held at KIT, Tiptur on 23rd June 2022.
• 8. Guided the student project which received First Place (Trophy with Rs. 10,000 Cash Prize) in DBIT TeXpo, a One-day National level Inter-Collegiate project exhibition organized by Don Bosco Institute of Technology on July 22nd 2022.
• 9. Guided the student project which received Third place (Trophy with Rs. 5,000 Cash Prize) in Avishkaar-2022 National Level Student Project Exhibition and Competition held at NITTE Meenakshi Institute of Technology, Bangalore on June 24th 2022.
• 1. The project titled "Optimization of High Yield Biodiesel Production from Fish Oil using Nano-catalyst and Performance Evaluation in Diesel Engine" was funded by the VTU-TEQIP Competitive Research Grant with a sanctioned amount of ₹2.00 lakh. The project was undertaken during the 2019-20 financial year. (Worked as a PI).
• 2. The research on "Production of Biodiesel from Fish Oil on Extracting Omega-3 Fatty Acid from Fish Oil" received funding from the All India Council for Technical Education (AICTE), New Delhi, under the Research Promotion Scheme (RPS). The total amount sanctioned was ₹13.21 lakh. The project was undertaken during the 2017-20 financial year. (Worked as a Co-PI).
• 3. A consultancy project, "Technical Audit Report of Upgradation of Marine Export Unit" for Karnataka Fisheries Development Corporation (KFDC), was completed with a project cost of ₹10 crore during the 2017-19 financial year.
• 4. The project "Design and Development of Unmanned Underwater Search, Rescue and Analysis Vehicle" was funded by KSCST, IISc Campus, Bangalore, with a financial grant of ₹7,000. (FY: 2023-24).
• 5. The project "Microwave Assisted Biodiesel Production from Hybrid Oils based on Chicken Fat Oil-Used Cooking Oil and their Impact Analysis on CI Engine" was funded by KSCST, IISc Campus, Bangalore, with a grant of ₹9,000 (FY: 2022-23).
• 6. The project "Design and Development of an Autonomous Ground Vehicle for Warehouse Management", which was selected for the final round exhibition, received funding of ₹7,000 from KSCST, IISc Campus, Bangalore. (FY: 2022-23).
• 7. The project "Design and Development of Effective Heat Recovery System using Lumber as Fuel with Combination of See beck Effect" received funding of ₹8,000 from KSCST, IISc Campus, Bangalore. (FY: 2022-23).
• 8. The project "Autonomous Pesticide Spraying and Disease Detection UAV Platform for Areca Nut and Pepper Plantations", which received the Best Project Award, was funded by KSCST, IISc Campus, Bangalore, with a grant of ₹12,000. (FY: 2021-22).
• 9. The project "Influence of Nano Additive on Performance and Emission Characteristics of Diesel Engine Running on Neat Garcinia Indica Oil Biodiesel", selected for the final round exhibition, was funded by KSCST, IISc Campus, Bangalore, with ₹10,000. (FY: 2021-22).
• 10. The project on "Modelling of Internal Nano-Finishing of Micro-Tubes using Ferro Fluid and Rotating Magnetic Field System" received ₹7,000 from KSCST, IISc Campus, Bangalore. (FY: 2021-22).
• 11. Project on "Autonomous Pesticide Spraying and Disease Detection UAV Platform for Areca Nut and Pepper Plantations" was funded by VTU, Belagavi, with a grant of ₹5,000. (FY: 2021-22).
• 12. Project on "Modelling of Internal Nano-Finishing of Micro-Tubes using Ferro Fluid and Rotating Magnetic Field System" received ₹5,000 from VTU, Belagavi. (FY: 2021-22).
• 13. The project "Extraction of Biofuel from Mixture of Garcinia Gummi Gutta and Garcinia India Seed Oil using Microwave Assisted Transesterification Process and Its Performance Evaluation in Diesel Engine" received funding of ₹6,500 from KSCST, IISc Campus, Bangalore. (FY: 2019-20).
• 14. The project "Design and Development of Drone for Spraying Pesticides to Areca-nut Trees", which received the Best Project Award, was funded by KSCST, IISc Campus, Bangalore, with a grant of ₹6,500. (FY: 2019-20).
• 15. The project "Usage of Acetylene and Ethanol as an Alternative Fuel for Four Stroke Petrol Engine" received ₹6,500 from KSCST, IISc Campus, Bangalore. (FY: 2018-19).
• 16. The project "Optimization for High Yield Biodiesel Production from Fish Oil using Nano Catalyst and Performance Evaluation in Diesel Engine" was funded by KSCST, IISc Campus, Bangalore, with a grant of ₹10,000. (FY: 2017-18).
• 17. Project on "Optimization for High Yield Biodiesel Production from Fish Oil using Base Catalyst and Performance Evaluation in Diesel Engine" was supported by VTU, Belagavi, with ₹5,000. (FY: 2017-18).
• 18. The Project "Modelling and Optimization of Sand Mould Properties Utilizing Industrial Wastes as Alternate Moulding Materials" was funded by KSCST, IISc Campus, Bangalore, with a grant of ₹7,000. (FY: 2016-17).
• 19. The project "Study of Performance, Combustion, and Emission Characteristics of Direct Injection Diesel Engine Fuelled with Waste Animal Fat Methyl Ester and its Conventional Diesel and Kerosene Blends" received ₹7,000 from KSCST, IISc Campus, Bangalore. (FY: 2016-17).

Journal

• Total International Journal Publications: 19 (Q1-6, Q2-3, Q3-1, Q4-4)
• 1. Ajith, B. S., Patel, G. M., Der, O., Selvan, C. P., Samuel, O. D., Annadurai, S., ... & Yadav, K. K. (2025). Microwave-assisted transesterification of hybrid Garcinia gummi-gutta and Garcinia indica oils: optimization using RSM and meta-heuristic algorithms for high-yield biodiesel production. Biomass and Bioenergy, 202, 108223. Elsevier. https://doi.org/10.1016/j.biombioe.2025.108223 (SCI/Scopus Indexed-Q1). (Year-2025)
• 2. Ajith, B. S., Prakash, S. B., Patel, G. M., Thomas, L., Hasan, M., Yadav, K. K., & Samuel, O. D. (2025). Optimizing biodiesel production from underutilized Garcinia indica oil through empirical, Coati Optimization and Salp Swarm Algorithm. Biomass and Bioenergy, 200, 108020. Elsevier. https://doi.org/10.1016/j.biombioe.2025.108020 (SCI/Scopus Indexed-Q1). (Year-2025)
• 3. B S, Ajith., G. C., M. P., Basanna Prakash, S., Thippeshnaik, G., & David Samuel, O. (2024). Optimizing engine performance and emission properties with Garcinia indica biodiesel: a holistic RSM-TLBO-DFA strategy. Biofuels, 1–18. https://doi.org/10.1080/17597269.2024.2437609. (Scopus Indexed-Q2). (Year-2024)
• 4. T. Ganesha, S.B. Prakash, S. Sheela Rani, B.S. Ajith, G.C. Manjunath Patel, Olusegun D. Samuel, “Biodiesel yield optimization from ternary (animal fat-cotton seed and rice bran) oils using response surface methodology and grey wolf optimizer”. Industrial Crops & Products, Elsevier. https://doi.org/10.1016/j.indcrop.2023.117569. (SCIE/Scopus Indexed-Q1). (Year-2023)
• 5. Thippeshnaik, G., Prakash, S. B., Suresh, Ajith. B., Chandrashekarappa, M. P. G., Samuel, O. D., Der, O., & Ercetin, A. (2023). Experimental Investigation of Compression Ignition Engine Combustion, Performance, and Emission Characteristics of Ternary Blends with Higher Alcohols (1-Heptanol and n-Octanol). Energies, MDPI, 16(18), 6582. https://doi.org/10.3390/en16186582. (SCIE/Scopus Indexed-Q1). (Year-2023)
• 6. Impha Yalagudige Dharmegowda, Lakshmidevamma Madarakallu Muniyappa, Ajith B. Suresh, Manjunath Patel Gowdru Chandrashekarappa, N.B. Pradeep, Optimization for waste coconut and fish oil derived biodiesel with MgO nanoparticle blend: Grey relational analysis, grey wolf optimization, driving training based optimization and election based optimization algorithm, Fuel, Published by Elsevier, Volume 338, 2023, 127249, ISSN 0016-2361, https://doi.org/10.1016/j.fuel.2022.127249. (SCIE/Scopus Indexed-Q1). (Year-2023)
• 7. Ajith B. Suresh, Chithirai Pon Selvan, N. Vinayaka, Manjunath Patel Gowdru Chandrashekarappa, Avinash Lakshmikanthan, Ravichandra Rangappa, Sanket Shinde, Vinayak R. Malik, Computational investigations of aluminum-based airfoil profiles of helical shaped vertical axis wind turbines suitable for friction stir joining and processing. International Journal on Interactive Design and Manufacturing (IJIDeM), Springer Publications (2023). https://doi.org/10.1007/s12008-022-01181-9. (Scopus Indexed-Q2). (Year-2023)
• 8. Dharmegowda, Impha Yalagudige, Lakshmidevamma Madarakallu Muniyappa, Parameshwara Siddalingaiah, Ajith Bintravalli Suresh, Manjunath Patel Gowdru Chandrashekarappa, and Chander Prakash. 2022. "MgO Nano-Catalyzed Biodiesel Production from Waste Coconut Oil and Fish Oil Using Response Surface Methodology and Grasshopper Optimization" Sustainability 14, MDPI, no. 18: 11132. https://doi.org/10.3390/su141811132. (SCIE/Scopus Indexed-Q1) (Year-2022)
• 9. Ajith BS, Math MC, Manjunath Patel GC, Mahesh B Parappagoudar, Engine Performance and Emission Characteristics of Diesel Engine Fuelled with Garcinia Gummi-Gutta based Biodiesel-Diesel-Ethanol Blends, SN Applied Sciences, Springer Publications. (Scopus Indexed-Q2). (Year-2021)
• 10. Ajith BS, Math MC, Manjunath Patel GC, Mahesh B Parappagoudar, Analysis and Optimization of Alkali catalyzed transesterification of Garcinia Gummi-Gutta seed oil for the production of biodiesel, Australian Journal of Mechanical Engineering, Taylor and Francis Publisher, (Scopus Indexed-Q3). (Year-2020)
• 11. Hanumantharaya R, Prem Kumar B G, Ajith B S, “A Critical Review on Nanoparticle Filled Adhesives for Structural Applications”, Journal of Mines, Metals & Fuels (Scopus Indexed-Q4). (Year-2023)
• 12. Ajith BS, Math MC, Manjunath Patel GC, Evaluation of performance and emission characteristics of diesel engine fuelled with garcinia gummi gutta biodiesel-diesel-diethyl ether blends, European Journal of Sustainable Development Research, Modestum Publisher, UK, 4(4), em0134. https://doi.org/10.29333/ejosdr/8353 (WoS Indexed). (Year-2020)
• 13. Ajith BS, Math MC, Manjappa S, Manjunath Patel GC, Performance and Emission Characteristics of Biodiesel Production from fish oil after Extracting Omega-3 Fatty Acid, Journal of Physics Conference Series (Scopus Indexed-Q4), 1473:012041, February 2020
• 14. Pradeep NB, Harsha HM, Manjunath Patel GC, Ajith BS (2021), Analysis and Optimization of Erosive Wear of Al 6113 Age-hardened Alloy: Taguchi and Desirability Function Approach. International Journal of Science and Engineering Research (IJSER) –ISSN 2229-5518.
• 15. Hanumantharaya R, Prem Kumar B G, Ajith B S, “Mechanical and wear behaviour of flyash reinforced epoxy composites”, Journal of Mines, Metals & Fuels (Scopus Indexed-Q4)- ISSN: 0022-2755.
• 16. Rathishchandra R Gatti, Ajith BS, Recent Trends in Point Absorber Wave Energy Converters, Sahyadri International Journal of Research, VOL 4, ISSUE 2, 2018.
• 17. Sahana C Hiremath, CT Puttaswamy, Sarathi Manjappa, Ajith BS, Isolation of Omega 3 Fatty Acid from Fish Oil, Sahyadri International Journal of Research, VOL 4, ISSUE 1, 2018.
• 18. Manjunath Patel G.C, Ajith B.S, Jonathan Rodrigues, Allan D Souza, Anirudh Mallya, Ashwith Mendonca, Teaching learning-based optimization of squeeze casting process for quality castings, Advances in Manufacturing Materials & Energy Engineering, Journal of Physics Conference Series (Scopus Indexed-Q4) (Icon MMEE -2018).
• 19. Ajith B. S., Pramod B. C., Impha Y. D., Rakshith H. S., Sudeep K., Pranav Padavu, Modeling, Fabrication and Automation of Areca Nut Sorting Machine, Journal of Mechanical Engineering and Automation, p-ISSN: 2163-2405; e-ISSN: 2163-2413 2017; 7(4): 99-102.
• 1. S. I. S, P. K. B, R. Menezes, R. Kamath, Ajith. B. S and C. Singh, "UAV Platform for Pesticide Spraying and Disease Detection for Areca Nut and Pepper Plantations" 2023 IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics (DISCOVER), Mangalore, India, 2023, pp. 167-172, doi: 10.1109/DISCOVER58830.2023.10316732.

Conference

• 1. Ajith B S, Math M C, Manjappa S, Manjunath Patel G C, “Performance and Emission Characteristics of Biodiesel Production from fish oil after Extracting Omega-3 Fatty Acid”. International Conference on “Thermo-Fluids and Energy Systems”, Organized by B.N.M. Institute of Technology, Bangalore.
• 2. Anup Pai, Sushan S Shetty, Adarsha, Ajith B S, “ADAS Overview and Machine Learning Algorithms”. International Conference on Intelligent Mobility Systems – 2024 Organized by Sahyadri College of Engineering & Management, Mangaluru held on 7th and 8th of June, 2024.
• 3. Pranesh D, Nandini G C, Suhal Abhish, Ajith B S, “Review on Biofuel from Biowaste through Thermochemical Conversion Process”, Multidisciplinary Conference on Engineering Science and Technology (MCEST 2022), Organized by Sahyadri College of Engineering & Management, Mangaluru in association with ITC Academy held on 27th and 28th May, 2022.
• 4. Manjunath Patel G.C, Ajith B.S, Jonathan Rodrigues, Allan D Souza, Anirudh Mallya, Ashwith Mendonca. “Teaching learning-based optimization of squeeze casting process for quality castings”. International Conference organized by MITE, Moodbidri, Dakshina Kannada. (Presented Paper).
• 1. Ajith BS, M.C. Math and Ravichandra R. Rangappa,” Investigation of Fuel Properties of Garcinia Gummi-gutta seed oil Methyl Ester and their Blends with Conventional Diesel oil and Ethanol, Diethyl Ether as Additives to assess their Usefulness as CI Engine Fuel”. National Conference on Renewable Energy Technology: Future, Opportunity and Challenges for India (RET: FOAC- 2017), Organized by Dept. of Thermal Power Engg, VTU RC, Mysuru. March 09-10, 2017. (Presented Paper)
• 2. Ajith BS, Dipesh Desai, Kalinga Nayak, “Electricity Generation by Employing Repulsion Magnets”. National Conference on Renewable Energy Technology: Future, Opportunity and Challenges for India (RET: FOAC- 2017), Organized by Dept. of Thermal Power Engineering, VTU RC, Mysuru. March 09-10, 2017. (Presented Paper)
• 3. Ajith BS, “Performance and Emission Characteristics of a Diesel Engine fuelled with GarciniaGummi-gutta Seed oil Methyl Ester and its blends with Conventional Diesel oil and Ethanol, Diethyl ether as Additives”, National Conference on Trends and Innovations in Automation, Materials and Thermal Engineering (TIAMTE - 2015). Organized by Dept. of Thermal Power Engg, VTU RC, Mysuru. May 21-22, 2015. (Presented Paper)
• 4. Ajith BS, “Hybrid Car with Compressed air Drive with Alternate Motor Drive”, National Conference on Topical Transcend in Mechanical Technology-2013. Organized by Dept. of Mechanical Engg, SJB Institute of Technology, Bangalore. May 4th, 2013. (Presented Paper)
• 5. Ajith BS, “Hybrid Car with Compressed air Technology and Motor Propulsion”, National Conference on Emerging Trends in Engineering and Technology”. Organized by Dept. of Mechanical Engg, Sapthagiri College of Engineering, Bangalore. May 11th, 2013. (Presented Paper)
• 6. Attended National Conference on Bioenergy under the theme “Decoding National Policy on Biofuels – 2018 and Exploring Opportunities in Karnataka” organized by KSBDB and KSCST, Govt. of Karnataka at Suvarna Soudha, Belagavi on 6th and 7th January-2020.

Book / Book Chapter

• 1. Authored a Scientific Book titled “Biofuel Production, Performance and emission optimization: Statistical and Artificial Intelligence Tools” in Springer Nature, ISBN- 978-3-031-84806-3,2025. https://link.springer.com/book/9783031848056#bibliographic-information. (Scopus Indexed). (Year-2025)
• 2. Edited a book - Titled “Design and Optimization of Mobile Robotics for Industry 5.0”. Wiley-Scrivener, 2025. Gatti, Rathishchandra R., Chandra Singh, Ajith B. S., and E. Fantin Irudaya Raj, editors.
• 3. Book Chapter - A Review of Autonomous Vehicles, by Joyston J. D’Costa and Ajith B.S published in an edited book titled "Self-Powered Cyber-Physical Systems" indexed in SCOPUS and WoS. (Publisher-Wiley) https://onlinelibrary.wiley.com/doi/book/10.1002/9781119842026.
• 4. Book Chapter - Introduction to Renewable Energy Resources and Sustainable Feedstocks for Biodiesel. In: Biofuel Production, Performance, and Emission Optimization. Springer Optimization and Its Applications, vol 215. Springer, Cham. https://doi.org/10.1007/978-3-031-84806-3_1(Scopus Indexed). (Year-2025)
• 5. Book Chapter - Studies on Oil Extraction, Biodiesel Production Methods, and Engine Performance and Emission Characteristics. In: Biofuel Production, Performance, and Emission Optimization. Springer Optimization and Its Applications, vol 215. Springer, Cham. https://doi.org/10.1007/978-3-031-84806-3_2, (Scopus Indexed). (Year-2025)
• 6. Book Chapter - Experimentation, Modelling, and Analysis of Biodiesel Conversion and Their Engine Performance and Emission Characteristics. In: Biofuel Production, Performance, and Emission Optimization. Springer Optimization and Its Applications, vol 215. Springer, Cham. https://doi.org/10.1007/978-3-031-84806-3_3 (Scopus Indexed). (Year-2025)
• 7. Book Chapter - Artificial Intelligence Modelling of Engine Performance and Emission Characteristics. In: Biofuel Production, Performance, and Emission Optimization. Springer Optimization and Its Applications, vol 215. Springer, Cham. https://doi.org/10.1007/978-3-031-84806-3_4 (Scopus Indexed). (Year-2025)
• 8. Book Chapter -Optimization of Engine Performance and Emission Characteristics. In: Biofuel Production, Performance, and Emission Optimization. Springer Optimization and Its Applications, vol 215. Springer, Cham. https://doi.org/10.1007/978-3-031-84806-3_5 (Scopus Indexed). (Year-2025)

Indian

• 1. Design of Bio Fermenter to Convert Bio-Mass to Ethanol, 202341045426, Indian Patent. Status: Published.
• 2. Portable Fish Trapping Equipment, 202341046014, Indian Patent. Status: Published.
• 3. Anti-Slip Clamp for Prevention of Vertically Climbing Plants Slipping from Cylindrical Support Structure, 202341050620, Indian Patent. Status: Published.
• 4. Unmanned Underwater Rover for Search, Rescue, and Research Vehicle, 202341050622, Indian Patent. Status: Published.
• 5. Intelligent Plastic Speed Breaker for Roads, 202341050623, Indian Patent. Status: Published.
• 6. Detachable Wind Energy Harvester for Automotive Wireless Sensors, 202341059217, Indian Patent. Status: Published.
• 7. Broadband Energy Harvesting Structure for Autonomous Wireless Sensor Nodes, 202341059218, Indian Patent. Status: Published.
• 8. Mechanically Operated Coffee Berry Picking Unit, 202341060697, Indian Patent. Status: Published.
• 9. Lab-Scale Anaerobic Gloves Chamber for Fermentation Process, 202341061280, Indian Patent. Status: Published.
• 10. Fruit Berry Separating Mechanism, 202341059216, Indian Patent. Status: Published.
• 11. Spherical Wave Energy Converter, 202341067110, Indian Patent. Status: Published.
• 12. Robotic Link with Continuously Varying Rigidity, 202341068996, Indian Patent. Status: Published

International

No international patent details available.

Attended

• 1. Participated Two-Day Workshop on Strategic Planning for the institution for Faculty organized by Sahyadri College of Engineering & Management, Mangaluru dated on 5th and 6th July 2024.
• 2. Participated Two Days Faculty Development Program on Outcome Based Education and Assessment organized by Sahyadri College of Engineering & Management, Mangaluru dated on 10th and 11th February, 2024.
• 3. Attended National IP Yatra – Two Days Workshop on Intellectual Property Rights in association with ASSOCHAM and MSME at Hotel Ocean Pearl Conference Hall, Mangaluru dated on 13th and 14th February, 2024.
• 4. Attended Two Days BITES Annual Convention-2024 organized by BITES at Infosys Campus, Mysuru dated on 1st and 2nd March, 2024.
• 5. Attended Four Days FDP on Application of Nano material using Machine Learning at P.E.S. Institute of Technology and Management, Shimoga dated on 4th December to 7th December,2023.
• 6. Participated in Five Days Faculty Development Program on Product Design Engineering using Fusion 360 conducted by ICT Academy on 28th August 2023 to 1st September 2023 at Sahyadri College of Engineering & Management, Mangalore.
• 7. Attended Two Days Workshop on “Development of IP Ecosystem at Academics” organized by Alva’s Institute of Engineering & Technology, Mijar, Moodbidri in Association with Karnataka State Council for Science and Technology (KSCST), IISc Campus, Bengaluru from 14th -15th March, 2023.
• 8. Attended Three days FDP Programme on IPR Commercialization on the eve of World IPR Day, organised by IPR Cell & Department of Mechanical Engineering, Sahyadri College of Engineering & Management, Mangaluru on 24th to 26th, April, 2023. The FDP was sponsored by Indian Society for Technical Education (Karnataka Chapter), Visvesvaraya Trade Promotion Centre (VTPC) and Karnataka State Council for Science and Technology (KSCST).
• 9. Attended SRISHTI – 2022 A State Level Engineering Students Project Expo Based on IR4/Idea and business pitch/Hackathon Held at BMS College of Engineering, Bengaluru from 25th -27th July 2022.
• 10. Attended Five-day Workshop on “Design Thinking Approach for Product Innovation” which was organized by Design Innovation Center (DIC) at Indian Institute of Technology Roorkee, Roorkee-247667, Uttarakhand from January 13th to 17th 2020.
• 11. Attended Three-day workshop on “Research Methodologies and Latex” on 05-07 September 2019 organized by Shree Devi Institute of Technology, Mangalore.
• 12. Attended Three-Day FDP (In House) on Aptitude and Soft Skill organized for the Placement and first year Faculty Members at Sahyadri College of Engineering and Management, Adyar, Mangalore from 16th to 18th January 2019.
• 13. Participated in Seminar on “Intellectual Property Rights: Significance in Business and Research”, at Sahyadri College of Engineering and Management, Mangalore on 6th October 2018.
• 14. Participated in a short-term course on “Computational Fluid Dynamics” during 13-17 August 2018 Under Quality Improvement Program at Indian Institute of Science, Bangalore.
• 15. Participated in the three-day FDP on “Orientation Course in Values Education” organized at Ramakrishna Institute of Moral and Spiritual Education-RIMSE, Mysore from 2nd to 4th March 2018.
• 16. Participated in the two-day workshop titled “Outcome Based Education and Blooms Taxonomy” organized by Sahyadri College of Engineering and Management, Mangalore on 4th and 5th July 2017.
• 17. Attended One day workshop on " Recent Advances and Challenges in Solar Thermal Systems " sponsored by TEQIP-II at NITK Surathkal, Karnataka-2017.
• 18. Attended Two-day workshop on “Soft Computing and Optimizing Techniques in Mechanical Engineering” organized by Sahyadri College of Engineering and Management, Mangalore-2017.
• 19. Attended Two-day workshop on “Industry Pollution Control” on account of World Environment Day – Connecting people to the nature, Association with KSPCB, organized by Sahyadri College of Engineering and Management, Mangalore-2017.
• 20. Attended One day workshop on “Finite Element Method-Foundation” organized by Department of Mechanical Engineering, Vidya Vikas Institute of Engineering and Technology, Mysuru. March 27th, 2014.
• 21. Attended Two days Faculty Development Program (FDP) on “Emerging Trends in Mechanical Engineering” organized by Department of Mechanical Engineering, St Joseph Engineering College, Mangalore – 2017.
• 22. Attended Two days Faculty Development Program (FDP) on “Turbo machinery and Its Applications” organized by Department of Mechanical Engineering, Vidya Vardhaka College of Engineering, Mysuru-2016.
• 23. Attended Three days in house training on “CFD OPEN FOAM” organized by Sahyadri College of Engineering and Management, Mangalore-2016.
• 24. Attended Two-Day NAAC Sponsored State Level Seminar (Online) on “Teaching Learning and Assessment Process as per OBE in Higher Education Institutions in line with NEP 2020" on 2nd - 3rd September, 2022 Organised by Sahyadri College of Engineering and Management, Mangalore.
• 25. Attended One Week Faculty & Executive Development Programme (FEDP) (Online) on “Application of Optimization Techniques in Engineering (AOTE)” from 28th March to 1st April, 2022 Organised by Department of Mechanical Engineering, Zakir Husain College of Engineering and Technology, Aligarh Muslim University, Aligarh.
• 26. Completed the ICT Mode Faculty Development Program (FDP) on “Design for Excellence: A Step Towards Innovation” held during 26th to 30th September, 2021 organized by Design Innovation Centre (DIC), Indian Institute of Technology Roorkee, Uttarakhand.
• 27. Completed the ICT Mode Faculty Development Program on “Product and Process Innovation: Concepts, Protection and Commercialization” held during 21st June to 25th June 2021 organized by Design Innovation Centre (DIC), Indian Institute of Technology Roorkee, Uttarakhand.
• 28. Attended AICTE-ISTE Sponsored One-week Induction/Refresher programme on “Cooperative and Collaborative Teaching Learning Processes” from 22-04-2021 to 28-04-2021 Organised by Department of Mechanical Engineering, Sahyadri College of Engineering and Management, Mangalore.
• 29. Attended One day online workshop on “Patents and Publications” conducted by IPR Cell, Sahyadri College of Engineering and Management in association with Sahyadri-Institution’s Innovation Council dated on 01-05-2021.
• 30. Participated & completed successfully AICTE Training and Learning (ATAL) Academy Online FDP on "Energy Engineering" from 26-09-2020 to 30-09-2020 at National Institute of Technology Silchar.
• 31. Participated & completed Five Days Online Faculty Development Programme on “Advancements in Phase Change Material Based Thermal and Renewable Energy Techniques” from 01/06/2020 to 05/06/2020 conducted at Lakireddy Bali Reddy College of Engineering (Autonomous), Mylavaram.
• 32. Participated in the Webinar “Industry 4.0 and its Role in Manufacturing” on 22-05-2020 and 23-05-2020 Organized by Department of Mechanical Engineering, SJBIT, Bengaluru.
• 33. Completed a technical e-quiz july2020 “Fundamentals of Thermodynamics” with a score of 100% Organized by Department of Mechanical Engineering, A J Institute of Engineering and Technology, Mangaluru.
• 34. Successfully passed the “Internal Combustion Engines Quiz” organized by Department of Mechanical Engineering, Lakireddy Bali Reddy College of Engineering, Mylavaram, Krishna (Dt.), Andhra Pradesh, India conducted on 14/06/2020.
• 35. Participating in the Webinar entitled “Quality Aspect of Biodiesel” held during NCSEM-2K20 on 15th and 16th July 2020, hosted by the Department of Mechanical Engineering, The Oxford College of Engineering, Bengaluru.
• 36. Successfully completed the “National Level Quiz on Outcome Based Education” organized by Department of Mechanical Engineering, Lakireddy Bali Reddy College of Engineering, Mylavaram, Krishna (Dt.), Andhra Pradesh, India conducted on 05/06/2020.
• 37. Successfully completing the online Quiz on “Mechanical Engineering” Organized by Department of Mechanical Engineering, Smt. Kamala & Sri Venkappa M. Agadi,College of Engineering & Technology, Lakshmeshwar.
• 38. Successfully completing the online Quiz on “Thermal Engineering-2020” Organized by Department of Mechanical Engineering, Sri Krishna Institute of Technology, Bengaluru on 23/05/2020.
• 39. Participated in webinar on “New Product Development” held on 20th June 2020 at REVA University, Bengaluru.
• 40. Participated in the three-day faculty development program on “Fluid & Structural Simulation using CRADLE” during 8-10 June, 2020 organized by Department of Aerospace Engineering, Lakireddy Bali Reddy College of Engineering, Mylavaram.
• 41. Successfully completed National level E-quiz on the “Basics of Thermal Engineering” on 7/1/2020 organized by Department of Mechanical Engineering, VVCE, Mysuru.
• 42. Participated in the “Webinar” in view of World Environment Day 2020 conducted on 27.05.2020. organized by Central Pollution Control Board, Karnataka State Pollution Control Board and Nagarjuna College of Engineering and Technology, Bengaluru.

Organised

• 1. Organising Secretary for two days FDP on “Patent Drafting and Commercialization” on 17th and 18th February 2025 organised by IPR Cell and Department of Mechanical Engineering & Robotics Engineering, Sahyadri College of Engineering & Management, Mangaluru sponsored by Karnataka State Council for Science & Technology (KSCST), Bengaluru.
• 2. Worked as a head of Printing and media committee at Grand Finale of the Smart India Hackathon (Software Edition) 2024 hosted by Sahyadri College of Engineering & Management, Mangaluru on 11th and 12thof Dec, 2024 in association with Ministry of Education-AICTE, Govt. of India.
• 3. Convener for One-Day Orientation Program on "The Impact of Research and Development on the Education System" on 19th August 2024. Organized by Sahyadri College of Engineering & Management (SCEM), Mangaluru in association with Visvesvaraya Technological University, Belagavi.
• 4. Convener for International Conference on Intelligent Mobility Systems (ICIMS)-2024 organized by the Department of Mechanical and Robotics Engineering at Sahyadri College of Engineering and Management, Mangaluru dated on June 7-8, 2024.
• 5. Organised one day Workshop on Entrepreneurship Skill, Attitude and Behaviour Development at Sahyadri College of Engineering & Management, Mangaluru dated on 30th January 2024.
• 6. Convener for Screening & Evaluation of MSME Idea Hackathon 3.0 (Women) Projects at Sahyadri College of Engineering & Management, Mangaluru dated on August 19, 2023.
• 7. Sponsorship Chair for 7th IEEE International Conference on Distributed Computing, VLSI, Electrical Circuits and Robotics (2023 IEEE DISCOVER) organized by IEEE Mangalore Sub-Section (R0011901), at Sahyadri College of Engineering & Management, Mangaluru, 13th -14th October 2023.
• 8. Organizing Committee member for Three days FDP Programme on IPR Commercialization on the eve of World IPR Day, organised by IPR Cell & Department of Mechanical Engineering, Sahyadri College of Engineering & Management, Mangaluru on 24th to 26th, April, 2023. The FDP was sponsored by Indian Society for Technical Education (Karnataka Chapter), Visvesvaraya Trade Promotion Centre (VTPC) and Karnataka State Council for Science and Technology (KSCST).
• 9. Co-Convener for One day Intellectual Property Workshop (Blended Mode) on Patent Filing, Trademark & Industrial Design, Geographical Indications organised at Sahyadri College of Engineering & Management, Mangaluru on World IP Day, 26th April, 2022 in association with Visvesvaraya Trade Promotion Centre (VTPC) and Karnataka State Council for Science and Technology (KSCST).
• 10. Organizing Committee member for World’s Biggest Open Innovation Model – SMART INDIA HACKATHON -2022, Grand Finale dated on 25th & 26th August 2022 was held at Sahyadri Campus, Adyar, Mangaluru.
• 11. Organized AICTE-ISTE Sponsored One-week Induction/Refresher programme on “Cooperative and Collaborative Teaching Learning Processes” from 25-03-2021 to 31-03-2021, 06-04-2021 to 12-04-2021 and 22-04-201 to 28-04-2021 (Three Phases) at Sahyadri College of Engineering and Management, Mangalore.
• 12. Organized an expert talk on “Importance of Safety Engineering and Job opportunities in Safety Engineering as safety Engineers” by Mr. Chethan Rai. In mechanical department. Operations Engineers at Alpha Technical Training and Development Centre, Bondel, Mangalore 575008 Dated on 18-02-2020.
• 13. Worked as a Core Committee team member for biggest marathon event “10k Run” sponsored by Sahyadri college of engineering & management dated on 02-20-2020.
• 14. Worked as a faculty Coordinator for Organizing One day National Seminar on “Future technological trends in Ceramic Materials” during 21-09-2019 at Sahyadri campus in collaboration with Indian Ceramic Society Karnataka Chapter (ICSKC), Bengaluru.
• 15. Organized a 7-days “Faculty Development Program for Student Induction (FDP-SI)” during 18-24 June 2019 at Sahyadri College of Engineering & Management, Mangaluru, sponsored by All India Council for Technical Education (AICTE).