Dr Vaishak N L

Areas of Interest

No areas of interest listed.

Ph.D. Supervision

• Metal Forming, Total Productive Maintenance, Waste Management

Awards / Grants

• Received Student Project Grant From Karnataka State Council for Science and Technology.

Journal

• “Mechanical and Tribological Wear Behavior of Epoxy Hybrid Composites”, Materials Today: Proceedings, Elsevier Publications, Vol. 5, No. 2, pp. 7947-7953, 2018. [Published in ScienceDirect] DoI: 10.1016/j.matpr.2017.11.477
• “Dry sliding wear behavior of AA 7075 reinforced short-coated carbon metal matrix composites”, Journal of Advanced Manufacturing Technology, Vol. 11, No. 2, pp. 115-128, 2017
• ., “A numerical study for determining the ideal operating speed for a two-wheeler rider on varying terrain amplitudes”, Journal of Mechanical Science and Technology, Vol. 30, No. 6, pp. 2435-2442, 2016. https://doi.org/10.1007/s12206-016-0913-y
• “Effect of Welding on the Impact Toughness of Low Carbon Steel”, Journal of Manufacturing Engineering, Vol. 13, No. 4, pp. 194-198, 2018.
• “Microstructural Responses of Inconel 690 Super Alloys to Artificial Ageing”, Journal of Manufacturing Engineering, Vol. 13, No.1, pp. 32-34, March 2018.
• “Failure Analysis of Woven Glass Fiber Reinforced Epoxy Plastic Composite Laminates by Drilling Using Finite Element Method”, American Journal of Materials Science, Vol. 7, No. 4, pp. 78-82, 2017. https://doi.org/10.5923/j.materials.20170704.02
• “Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with Short Coated Carbon Metal Matrix Composites”, American Journal of Materials Science, Vol. 7, No. 4, pp. 102-107, 2017. https://doi.org/10.5923/j.materials.20170704.07
• “Drilling analysis and process modeling of [0/90/0] oriented glass fiber reinforced epoxy plastic (GFRP) composite laminates”, International Journal of Materials Science, Vol. 10, No. 2, pp. 183-193, 2016
• “Effect of burr height and surface roughness in drilling low alloy steels for different drill-point angles using design of Experiments and Artificial Neural Networks”, International Journal of Material Science and Technology, Vol. 15, No. 2-3, pp. 109-133, 2016. https://doi.org/10.17654/MT015230109
• Investigation of thrust force and torque induced failure on stacking sequence of glass fibers in GFRP composite laminates during drilling process”, International Journal of Advanced Manufacturing Materials and Characterization, Vol. 6, No. 1, pp. 86-92, 2016. https://doi.org/10.11127/ijammc2016.04.16
• “Effect of ageing on the Tribological behavior of Inconel 690 using Taguchi’s Method”, American Journal of Materials Science, Vol. 6, No. (4A), pp. 25-30, 2016. https://doi.org/10.5923/c.materials.201601.05
• “Evaluation and Characterization of Tensile Properties of Short Coated Carbon Fiber Reinforced Aluminum 7075 Alloy Metal Matrix Composites via Liquid Stir Casting Method”, Material Science Research India, Vol. 13, No. 2, pp.66-73, 2016. https://doi.org/10.13005/msri/130202
• “Performance investigation of a flat plate collector incorporated with different type of materials”, International Journal of Research in Engineering and Technology, Vol. 2, No. 8, August 2013. https://doi.org/10.15623/ijret.2013.0208064
• “Study of Vibration and its effects on health of a Two Wheeler Rider”, International Journal of Research in Engineering and Technology, Vol. 2, No. 8, pp. 51-55, August 2013. https://doi.org/10.15623/ijret.2013.0208007
• “Development of Mathematical Models for Ultimate Compressive Strength Based on Experimental Observations by Drilling for Glass Epoxy Composites”, International Journal of Management and Applied Science, Vol. 1, No. 11, pp. 89-91, 2015. https://doi.org/IJMAS-IRAJ-DOI-3579
• “Analysis of Variance (ANOVA) and Response surface analysis of Thrust force and Torque in drilling granite fiber reinforced epoxy composites by using Multi facet HSS twist drill”, Procedia Material Science, Elsevier Publications, Vol. 5, pp. 1660-1669, 2014. https://doi.org/10.1016/j.mspro.2014.07.354
• “Investigation on different compositions of E-glass/Epoxy composite and its application in Leaf springs”, IOSR journal of Mechanical and civil engineering (IOSR-JMCE), Vol. 11, No. 1, February 2014. https://doi.org/10.9790/1684-11157480
• 1. Prasad chandran N, SS Balakrishna “Design, fabrication and performance analysis of silicon carbide filled glass epoxy composites”, at International Conference on composite Materials, held at NITK surathkal.

Conference

• “Effect of Electric Arc Welding on Impact of different Mild Steel Weld Geometries”, International Conference on Green Trends in Mechanical Engineering Sciences, Malnad College of Engineering, Hassan, Karnataka, India, October 3-5, 2018.
• “Failure analysis of woven glass fiber reinforced epoxy plastic composite laminates by drilling”, Frontiers in Automotive and Mechanical Engineering, Satyabhama University, Chennai, India, July 7-9, 2016.
• “Effect of Tempering on the Mechanical Properties of AISI 52100 alloy steel”, International Conclave on Innovations in Engineering & Management, Al-Waljat College of Applied Sciences, Muscat, Sultanate of Oman, 24-25 February 2016
• “Design and Simulation of Robot Manipulator using MATLAB and Simulink”, International Conclave on Innovations in Engineering & Management, Al-Waljat College of Applied Sciences, Muscat, Sultanate of Oman, 24-25 February 2016.
• “Development of Mathematical Models for Ultimate Compressive Strength Based on the Experimental Observations by Drilling for Glass Epoxy Composites”, International Conference on Current Research in Electronics, Computer Science, Information Technology and Mechanical Engineering (ICECSITME-15), Goa, India, October 4, 2015.
• “Drilling analysis of [0/90/0] oriented glass fiber reinforced epoxy plastic (GFRP) composite laminates”, International Conference on Polymer Composites ICPC-2014, National Institute of Technology Karnataka (NITK) Surathkal, Mangalore, Karnataka, India, December 19-20, 2014.
• “TPM – A Review Towards its Implementation”, International Conference on Current Trend in Engineering and Management held at Vidyavardhak College of Engineering, Mysore, India on July 17th -19th 2014.
• “Analysis of Thrust force and Torque in drilling granite particulate reinforced epoxy composites by using Multi facet HSS twist drill”, 8th Global Engineering, Science and Technology conference, Novotel hotel world trade center, Dubai, UAE, April 2014.
• “Analysis of Variance (ANOVA) and Response surface analysis of Thrust force and Torque in drilling granite fiber reinforced epoxy composites by using Multi facet HSS twist drill”, International conference on Advances in Manufacturing and Materials Engineering ICAMME 2014, National Institute of Technology (NITK), March 2014, Mangalore, Surathkal, India.
• “Mechanical and Tribological Wear Behavior of Epoxy Hybrid Composites”, International Conference on Emerging Trends in Materials and Manufacturing Engineering (IMME17), held at National Institute of Technology- Tiruchirapalli, Tamil Nadu, India, March 2017.
• “Failure Analysis of Woven Glass Fiber Reinforced Epoxy Plastic Composite Laminates by Drilling using Finite Element Method”, National Conference on Emerging Trends in Mechanical Engineering, held at St. Josephs Engineering College, Mangalore, India, August 4-5, 2017
• “Evaluation of Mechanical Properties of Aluminium Alloy 7075 Reinforced with Short Coated Carbon Metal Matrix Composites”, National Conference on Emerging Trends in Mechanical Engineering, held at St. Josephs Engineering College, Mangalore, India, August 4-5, 2017.
• “Processing municipal solid waste (MSW) using portable solid incinerator” National Conference on Green Energy- Potentials & Applications (NCGEPA-2016) held on 13th and 14th May 2016 at Vivekananda College of Engineering and Technology, Puttur, India.
• “Effect of ageing on the Tribological behavior of Inconel 690 using Taguchi’s Method”, National Conference on Emerging Trends in Mechanical Engineering, St. Joseph’s Engineering College, Mangalore, India held on 5-6, August 2016
• “An empirical study for enhancing efficiency and sustainability of solar flat plate collectors”, First National Conference on Renewable Energy Systems and Engineering (NCRESE-14), Vivekananda College of Engineering and Technology, Puttur, India, November 2014.
• “Energy barriers and solutions- A Review”, First National Conference on Renewable Energy Systems and Engineering (NCRESE-14), Vivekananda College of Engineering and Technology, Puttur, India, November 2014.
• “A Review of Swarm Robotics”, National Conference on Emerging Trends in Automation and Control, ISOI and Vimal Jyothi Engineering College, Champeri, Kannur, Kerala, India on 30th March 2012.
• “A different Approach to Service Robot”, National Conference on Emerging Trends in Engineering Technologies held on 10th March 2012 at Jyothi Institute of Technology Bangalore, India.

Book / Book Chapter

No book details available.

Indian

• Indian Patent on System For Management Of Ventilators For Covid Patients In Hospital Using Block Chain

International

No international patent details available.

Attended

• Workshop / Seminars
• 1 Participated on International workshop on Stress assisted environmental damage in structural materials (EDSA 2015) Held at Indian Institute of Technology Madras (IIT-M) on 27th February to 2nd March 2015.
• 2 Underwent a “FEEL TEACHER” learning and development intervention conducted from 26th to 28th July 2013, held by College of Leadership and Human Resource Development CLHRD at Sahyadri College of Engineering & Management, Mangalore, India
• 3 . Participated in a two day national level Faculty development program on “Application of Stastical and Neural network technique in Engineering” organized by Shri Madhwa Vadiraja Institute of Technology and Management Udupi, Mangalore under Indian Society forTechnical Education on 6-7th June 2016
• 4 Participated in a Two day workshop on “Thermal Properties of Materials” held by the Department of Mechanical Engineering, Alva’s Institute of Engineering & Technology, Mijar, Moodabidri, Mangalore, India, 27-28 January, 2015

Organised

• To create interest in the field of Science and technology every year there will be a project(Working and Non working)competition will be arranged in different pre university colleges and many high schools. By nurturing children's ideas to problem solving ability and winding up with a model or a project which will be exhibited in the science fair.
• The event will be coordinated in the respective Pre university colleges or in the High schools and mentoring the students in this regard.