FACULTY PROFILE

Dr. Rajesha S

Dr. Rajesha S

  • Department: Mechanical Engineering
  • Designation: Principal
  • Phone: 9448100123
  • Email: principal@sahyadri.edu.in
  • Teaching Experience: 18 Years
  • Industry Experience: 9.0 Years
  • Research Experience: 7.0 Years
COURSES SPECIALIZATION INSTITUTION UNIVERSITY
BE Mechanical Engineering PES College of Engineering, Mandya Mysore university
M Tech Maintenance Engineering Sri Jayachamarajendra College of Engineering, Mysore VTU, Belgaum
Ph.D Mechanical And Industrial Engineering Indian Institute of Technology Roorkee (IITR) Indian Institute of Technology Roorkee (IITR) uttarakhand

Membership of Professional Bodies:

1. FIEI Member (F-1213640) 2. Life member of the Indian Society for Technical Education, India ( L43999) 3. Board of studies members of Mahamaya Technical University, Noida, 2011-12 (formerly UPTU) 4. Board of studies Convener of Mahamaya Technical University , Noida 2012-13 5. RDC Member of Mahamaya Technical University, Noida 2012-14 (formerly UPTU) 6. Board of studies members of Dr. AKTU, Lucknow (formerly UPTU) 2015-till date 7. Member of the Section Managing Committee of ISTE UP & Uttaranchal Section (January 2015 to December 2017).

Current Research

 RESEARCH INTEREST

·       Advance Manufacturing Process, Hybrid Machining Process, Metal Matrix Composites, Metal Costing, Microwave Metal Processing, Advance Welding Technology.

 

L. Research Publications

Journal Papers:

 

 

·         Ravichandra Rangappa, Rajesha S., Sang C. C. (2020), “Thermal analysis of natural gas as an alternative fuel for gasoline engine, Journal of Physics: Conference Series” Vol 1473, pp 1-13 DOI:  10.1088/1742-6596/1473/1/012040.

 

Ravichandra Rangappa, Srithar Rajoo, Samin P. M., Rajesha S (2020), “Compactness analysis of pcm based cooling systems for lithium battery operated vehicles”. International Journal of Energy and Environmental Engineering, Vol 1, pp 1-18,

 

Priyanka Singh, Nathi Ram Chauhan and Rajesha S (2019), “Influence of Cobalt, Iron And Copper on Microstructure and Mechanical Properties of Alumina/SiC Nano-Ceramic Composite”, Materials Research Express, Volume 6(6), DOI:10.1088/2053-1591/ab0cd8. (IF 1.449)

 

·      Navin Kumar Jha, Tarlochan Singh, Akshay Dvivedi, Rajesha S (2018), “Experimental Investigations Into Triplex Hybrid Process of GA-RDECDM During Subtractive Processing of MMC’s”, Materials and Manufacturing Processes, Volume 34:3, pp 243-255, DOI:10.1080/10426914.2018.1512126. (IF 3.38)

 

·      Nitin Kumar Chauhan, Alok Kumar Das and Rajesha S (2018), “Optimization of Process Parameters Using Grey Relational Analysis and Taguchi Method During Micro-EDMing” Materials Today: Proceedings, Volume 5, Issue 13, Part 3, Pages 27178-27184.(IF 0.694)

 

Venkatesh, Rajesha S, AK Sharma, Pradeep Kumar, G (2015),"Experimental Investigation into Ultrasonic Assisted Abrasive Flow Machining (UAAFM) Process", International Journal of Advanced Manufacturing Technology (IJAMT), Volume80, Issue 1-4 pp 477-493. IF 1.776

 

Radha Raman Mishra, Rajesha S and Apurbba Kumar Sharma, (2014), "Microwave sintering of metal powders- A review", International Journal of Advanced Mechanical Engineering, Vol. 4 (3), pp. 315-322

 

Radha Raman Mishra, Visnu Kumar Tiwari, Rajesha S., (2014), "A Study of Tensile Strength of MIG And TIG Welded Dissimilar Joints of Mild Steel and Stainless Steel", Int. Journal of Advances in Materials Science and Engineering. Vol. 3(2), pp 23-32.

 

Ishna Gupta, Radha Raman Mishra, Nagraj M, Rajesha S., (2014), "An Overview on Modes of Failure of Brass Components", International Journal of Mechanical and Production Engineering. Vol. 2(5), pp32-36.

 

Shilpi Sharma, Radha Raman Mishra, Veerendra A N, Rajesha S., (2014), "Effective Parameters of Electrochemical Discharge Machining – A Review", International Journal of Mechanical and Production Engineering, Vol. 2(5), pp 37-41.

 

Radha Raman Mishra, Veerendra A N, Rajesha S., (2014), "High Velocity Impact Analysis of Kevlar Composite by MATLAB” Indian", Journal of Advances in Chemical Sciences, Vol. 2, pp68-71, IF 0.63

 

Piyush Pant,, Navneet Kumar Pandey,  Rajesha S, Gaurav Jain., (2014), "Experimental Study of surface roughness in WEDM process and ANN modeling”, International Journal of Engineering and Advanced Technology, Vol. 3, pp57-61.

 

Rajesha S., C.S. Jawalkar, Rada Raman Mishra,   A.K.Sharma, Pradeep Kumar, (2014), "Study of Recast Layers and Surface Roughness on Al-7075 Metal Matrix Composite during EDM Machining" International Journal of Recent Advances in Mechanical Engineering, Vol. 3 (1), pp 61-70.

 

Radha Raman Mishra, Rajesha S., Apurbba Kumar Sharma, (2013), "Development and Characterization of Developed Foamed Carbon Fiber Composite", I-Manager Journal of Civil Engineering, Vol. 3, pp23-27, IF 0.562

 

Rajesha S., A. K. Sharma and Kumar Pradeep, (2012) "On Electro Discharge Machining of Inconel 718 with Hollow Tool " Journal of Materials Engineering and Performance, Vol. 21(6), pp882-891 , IF 0.915

 

Rajesha S., Apurbba Kumar Sharma and Kumar Pradeep, (2010), “Influence of Process Parameters in Centrifugal Force Assisted Abrasive Flow Machining”, International Journal of Engineering Research and Technology. Volume 3, Number 3, pp. 653-663.

 

Rajesha S., G. Venkatesh, A. K. Sharma, Kumar Pradeep (2010), “Performance Study of A Natural Polymer Based Media for Abrasive Flow Machining”, Indian Journal of Engineering and Material Sciences, Vol. 17, 2010, pp. 107-113 .

 

Rajesha S., A. K. Sharma and Kumar Pradeep, (2010), “An Approach to Optimization of Process Parameters While EDMing Inconel 718 Using Taguchi’s Orthogonal Array”, International Journal of Production and Quality Engineering, Vol. 1, No. 2, pp.63-70.

 

A. K. Sharma, S. Rajesha, Uday Divekar, Dinesh Kumar and Anish Sachdeva, (2010) “A Fuzzy Approach to Selection of Optimum Maintenance Strategy – A Case Based Analysis”, Industrial Engineering Journal, Vol. 2 (14), pp. 4-11.

 

Rajesha S., A. K. Sharma and Kumar Pradeep, “Optimization of Process Parameters of WEDM While Machining Inconel 718 Using Taguchi’s Orthogonal Array”, International Journal of Engineering, Technology and Management. (Accepted)

 

Rajesha S., A. K. Sharma and Kumar Pradeep, “Tool Wear Mechanisms in Electro Discharge Machining of Inconel 718”, Wear, (Accepted).

 

Rajesha S., Pramod Kumar Patnaik, Apurbba Kumar Sharma, Pradeep Kumar, “Surface Integrity Evaluation of Electro Discharge Machined Inconel 718” International Journal of Advanced Manufacturing Technology’ (Accepted).

 

Rajesha S., A. K. Sharma and Kumar Pradeep, “Some Aspects of Surface Integrity Study of Electro Discharge Machined Inconel 718”, Proceedings of the Institution of Mechanical Engineers, PartC, Journal of Engineering Manufacture  (Communicated).

 

 

 

 

Awards

No Awards Details Found.

Grants Received Research/Projects Guided (Beyond Academic)

SPONSORED PROJECTS

 

Period

Sponsoring Organization

Title of Project

Grant amount

Status (ongoing/completed)

Feb 2006-Feb 2008

AICTE

Exhaust gas analysis of IC Engine

9,00,000.00

Completed

Aug 2013-Aug 2016

AICTE-RPS

Development of  Ultrasonic Assisted Micro Electro Discharge Machining Process for Machining Microchannels

16,81,000.00

Ongoing

Apr 2017-

Apr 2019

AKTU-VRPS

Parametric studies during

machining of

Microchannels on Silicon

wafer using micro

ultrasonic machine

3,09,500.00

Ongoing

Dec-2016

AKTU-FDP

One week FDP/Workshop on Manufacturing world & its Future

1,50,000.00

Ongoing

(2-7 April 2018)

Jun 2017

AICTE-GOC

International Conference on Mechatronics and Intelligent Manufacturing

5,00,000.00

Ongoing

 

H. CONSULTANCY

 

Period

Sponsoring Organization

Title of Project

Grant amount

Status (ongoing/completed)

Dec  2014 -

Feb 2017

Fanuc India Pvt Ltd, Noida

Injection Mould Design

3,12,140.00

Completed

Oct 2016- Mar 2017

Samshek Pvt Ltd

Design of Robotic Arm for Swing Machine

1,50,000.00

Completed

 

J. SUPERVISION:

 

SN.

Name of Student

Masters/PhD

Year of Completion

Title of thesis (area)

Co-guides

 (if any)

1

Mr. Naveen Kumar Jha

PhD

Ready for Submission

Materials

Dr. Akshy Devedi

2

Mr. Nitin Kumar Chavan

PhD

Pursuing

Manufacturing

Dr. Alok Kumar

3

Ms. Piyanka Singh

PhD

Pursuing

Material  & Manufacturing

Dr. Nati Ram Chavan

4

Vikas Kumar Singla

PhD

Pursuing

Powder mixed EDM Process

Dr. Nagesh S

5

Rakhi Bhati

M. Tech

2014

Magnetostatic Force Analysis in Ball End Magnetorheological Finishing Tool

-

6

Vikas Kumar Singla

M. Tech

2014

Optimization of CNC Drilling Process Parameters of Foamed Carbon Fiber Composite for Quality Characteristics

Dr. Sudhir Kumar

7

Piyush Pant

M. Tech

2014

Experimental Study of Surface Roughness in WEDM Process and Prediction Model by ANN

Mr. Navneet Kumar Pandey

8

Ritesh Kumar Chauhan

M. Tech

2015

Feasibility Evaluation of Drilling Process on Aluminium Material by Using Microwave Energy

Mr. Radha Raman Mishra

9

Ujjwal Kumar Srivastava

M. Tech

2015

Development And Characterisation of Ai-MMC By Stir Casting Method Using Fly ASH as Reinforcement

Mr. Navin Kumar Jha

10

Ishna Gupta

M. Tech

2015

Experimental Study on The Effect of Heat Treatment Process of C36000 Brass

Mr. Nagaraj M

11

Rajdeep Singh Chauhan

M. Tech

2015

Effect Of Process Parameters To Produce Micro Holes By Micro EDM

Mr. Nitin Kumar Chauhan

12

Lalit Kumar

M. Tech

2016

Development of Aluminium Based Metal Matrix Composite and its Characterizations.

-

13

Divya Chandra

M.Tech

2016

Fabrication of Metal Matrix Composite and Optimization of Machining Parameters using EDM.

Mudit Kr Jain

14

Nisha Singh

M.Tech

2017

Performance evaluation of friction welding process on MMCs

--

International Journals:

No. of International Journals Publications:23

 

 

Research Publications

Journal Papers:

 

 

·         Ravichandra Rangappa, Rajesha S., Sang C. C. (2020), “Thermal analysis of natural gas as an alternative fuel for gasoline engine, Journal of Physics: Conference Series” Vol 1473, pp 1-13 DOI:  10.1088/1742-6596/1473/1/012040.

 

Ravichandra Rangappa, Srithar Rajoo, Samin P. M., Rajesha S (2020), “Compactness analysis of pcm based cooling systems for lithium battery operated vehicles”. International Journal of Energy and Environmental Engineering, Vol 1, pp 1-18,

 

Priyanka Singh, Nathi Ram Chauhan and Rajesha S (2019), “Influence of Cobalt, Iron And Copper on Microstructure and Mechanical Properties of Alumina/SiC Nano-Ceramic Composite”, Materials Research Express, Volume 6(6), DOI:10.1088/2053-1591/ab0cd8. (IF 1.449)

 

·      Navin Kumar Jha, Tarlochan Singh, Akshay Dvivedi, Rajesha S (2018), “Experimental Investigations Into Triplex Hybrid Process of GA-RDECDM During Subtractive Processing of MMC’s”, Materials and Manufacturing Processes, Volume 34:3, pp 243-255, DOI:10.1080/10426914.2018.1512126. (IF 3.38)

 

·      Nitin Kumar Chauhan, Alok Kumar Das and Rajesha S (2018), “Optimization of Process Parameters Using Grey Relational Analysis and Taguchi Method During Micro-EDMing” Materials Today: Proceedings, Volume 5, Issue 13, Part 3, Pages 27178-27184.(IF 0.694)

 

Venkatesh, Rajesha S, AK Sharma, Pradeep Kumar, G (2015),"Experimental Investigation into Ultrasonic Assisted Abrasive Flow Machining (UAAFM) Process", International Journal of Advanced Manufacturing Technology (IJAMT), Volume80, Issue 1-4 pp 477-493. IF 1.776

 

Radha Raman Mishra, Rajesha S and Apurbba Kumar Sharma, (2014), "Microwave sintering of metal powders- A review", International Journal of Advanced Mechanical Engineering, Vol. 4 (3), pp. 315-322

 

Radha Raman Mishra, Visnu Kumar Tiwari, Rajesha S., (2014), "A Study of Tensile Strength of MIG And TIG Welded Dissimilar Joints of Mild Steel and Stainless Steel", Int. Journal of Advances in Materials Science and Engineering. Vol. 3(2), pp 23-32.

 

Ishna Gupta, Radha Raman Mishra, Nagraj M, Rajesha S., (2014), "An Overview on Modes of Failure of Brass Components", International Journal of Mechanical and Production Engineering. Vol. 2(5), pp32-36.

 

Shilpi Sharma, Radha Raman Mishra, Veerendra A N, Rajesha S., (2014), "Effective Parameters of Electrochemical Discharge Machining – A Review", International Journal of Mechanical and Production Engineering, Vol. 2(5), pp 37-41.

 

Radha Raman Mishra, Veerendra A N, Rajesha S., (2014), "High Velocity Impact Analysis of Kevlar Composite by MATLAB” Indian", Journal of Advances in Chemical Sciences, Vol. 2, pp68-71, IF 0.63

 

Piyush Pant,, Navneet Kumar Pandey,  Rajesha S, Gaurav Jain., (2014), "Experimental Study of surface roughness in WEDM process and ANN modeling”, International Journal of Engineering and Advanced Technology, Vol. 3, pp57-61.

 

Rajesha S., C.S. Jawalkar, Rada Raman Mishra,   A.K.Sharma, Pradeep Kumar, (2014), "Study of Recast Layers and Surface Roughness on Al-7075 Metal Matrix Composite during EDM Machining" International Journal of Recent Advances in Mechanical Engineering, Vol. 3 (1), pp 61-70.

 

Radha Raman Mishra, Rajesha S., Apurbba Kumar Sharma, (2013), "Development and Characterization of Developed Foamed Carbon Fiber Composite", I-Manager Journal of Civil Engineering, Vol. 3, pp23-27, IF 0.562

 

Rajesha S., A. K. Sharma and Kumar Pradeep, (2012) "On Electro Discharge Machining of Inconel 718 with Hollow Tool " Journal of Materials Engineering and Performance, Vol. 21(6), pp882-891 , IF 0.915

 

Rajesha S., Apurbba Kumar Sharma and Kumar Pradeep, (2010), “Influence of Process Parameters in Centrifugal Force Assisted Abrasive Flow Machining”, International Journal of Engineering Research and Technology. Volume 3, Number 3, pp. 653-663.

 

Rajesha S., G. Venkatesh, A. K. Sharma, Kumar Pradeep (2010), “Performance Study of A Natural Polymer Based Media for Abrasive Flow Machining”, Indian Journal of Engineering and Material Sciences, Vol. 17, 2010, pp. 107-113 .

 

Rajesha S., A. K. Sharma and Kumar Pradeep, (2010), “An Approach to Optimization of Process Parameters While EDMing Inconel 718 Using Taguchi’s Orthogonal Array”, International Journal of Production and Quality Engineering, Vol. 1, No. 2, pp.63-70.

 

A. K. Sharma, S. Rajesha, Uday Divekar, Dinesh Kumar and Anish Sachdeva, (2010) “A Fuzzy Approach to Selection of Optimum Maintenance Strategy – A Case Based Analysis”, Industrial Engineering Journal, Vol. 2 (14), pp. 4-11.

 

Rajesha S., A. K. Sharma and Kumar Pradeep, “Optimization of Process Parameters of WEDM While Machining Inconel 718 Using Taguchi’s Orthogonal Array”, International Journal of Engineering, Technology and Management. (Accepted)

 

Rajesha S., A. K. Sharma and Kumar Pradeep, “Tool Wear Mechanisms in Electro Discharge Machining of Inconel 718”, Wear, (Accepted).

 

Rajesha S., Pramod Kumar Patnaik, Apurbba Kumar Sharma, Pradeep Kumar, “Surface Integrity Evaluation of Electro Discharge Machined Inconel 718” International Journal of Advanced Manufacturing Technology’ (Accepted).

 

Rajesha S., A. K. Sharma and Kumar Pradeep, “Some Aspects of Surface Integrity Study of Electro Discharge Machined Inconel 718”, Proceedings of the Institution of Mechanical Engineers, PartC, Journal of Engineering Manufacture  (Communicated).

 

 

 

No National Journals Found.

International Conferences:

No. of International Journals Conferences:23

  CONFERENCES

 

1.

Nitin Kumar Chauhan, Alok Kumar Das and Rajesha S (2016) “Optimization of Process Parameters using Grey Relational Analysis and Taguchi Method during Micro-EDMing” ‘ICAMM-2016 Conference’ Hyderabad

2.

Priyanka Singh, Nathi Ram Chauhan and Rajesha S, (2015) "Nano Ceramic Matrix Composite Development and its Applications", International Conference On Advanced and Agile Manufacturing System (ICAM-2015), pp. 272-277

3.

Shilpi Sharma, R. R. Mishra, Veerendra Kumar A N and Rajesha S., (2014), "Effective Parameters of Electrochemical Discharge Machining – A review",  Proceeding of International conference International Conference on Recent Development in Mechanical and Industrial Engineering , SARC, New Delhi, pp. 55-59.

4.

Ishna Gupta,     R .R. Mishra, M. Nagaraj and Rajesha S., (2014), "An Overview on Modes of Failure of Brass Components", Proceeding of International Conference on Recent Development in Mechanical and Industrial SARC, New Delhi, pp. 51-54.

5.

Radha Raman Mishra, Rajesha S. and A. K. Sharma, (2014), "Design and analysis of carbon fiber and PEEK sandwich composite" Proceeding of  International Conference on Emerging Materials and Applications (ICEMA - 2014), April 5-6th 2014, IIT Roorkee Saharanpur Campus, India

6.

R. R. Mishra, Rajesha S, and A K Sharma, (2014), "Microwave sintering of pure metal powders – A review", International conference ITMMMAAA-2014, 15-16 Feb 2014, JNU, New Delhi, India

7.

Vikas Kumar Singla,  Sudhir Kumar, Rajesha S. and Radha Raman Mishra, (2012), Manufacturing and Drilling Analysis of Foamed Carbon Fiber Composite,  International conference  on Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME-2012),  5-7th October 2012, PTU, Chandigarh, pp.  148-15.

8.

N K Jha, Akshay Dvivedi, Rajesha S, and Ujjwal Kumar Srivastava (2014), "Development Processes of Cost Effective Aluminium Metal Matrix Composite - A Review", Innovative Trends in Mechanical, Material, Manufacturing, Automotive, Automobile and Aeronautical Engineering” (ITMMMAAAE-2014) to be held at Jawaharlal Nehru University, New Delhi. 

9.

Radha Raman Mishra, Veerendra Kumar A. N. and Rajesha S, (2014), "High Velocity Impact Analysis of Kevlar Composite by MATLAB", 6th National Conference on Advances in Polymeric Materials (POLYCON 2014), 16-17th April, SJCE Mysore.

10.

  Ujjawal Kr Srivastva, N. K Jha, R.R. Mishra, A K Diwedi and Rajesha S (2014),  "Development of Low Cost Metal Matrix Composite by Stir Casting Method- A review",  Proceeding of National Conference on Research and Innovation in Mechanical Engineering (RIME-2014), TITS and TIT Bhopal, March 5-6th 2014, pp. 194-197.

11.

Radha Raman Mishra, Rajesha S Visnu Tiwari, Ritesh Kumar, (2013), "Properties Evaluation of Injection Moulded Carbon Fiber Foamed Composites", National Conference at RIET, Faridabad, pp. 99-101.

12.

Rajesha S., A.K. Sharma, Kumar Pradeep, (2011), "Some Studies on Performance of A Natural Polymer Media for Abrasive Flow Machining" Proceedings: TMS -2011, 140th Annual Meeting and Exhibition, February 27 - March 3, 2011 San Diego, California, Volume 3[DOI: 10.1002/97811180621 73. ch41] pp. 333–340.

13.

Rajesha S., A.K. Sharma, and Kumar Pradeep (2012), "Tool Wear Analysis While Electro Discharge Machining of Inconel 718", WASET 2012 Zurich, Switzerland, January 15-17, 2012, pp. 186-191.

14.

Rajesha S., Sharma A. K, Kumar Pradeep, (2010), "Influence of Parameters on Process Performance During Electro Discharge Machining of Inconel-718" Proceedings: TMS (The Minerals, Metals & Materials Society) -2010 , 139th Annual Meeting & Exhibition, Seattle, Washington USA,  February 14-18, 2010, Volume 3, pp. 841-848.

15.

G. Venkatesh, Rajesha S A. K. Sharma, and Kumar Pradeep, (2010), "Performance Evaluation of a New Abrasive Carrier for Abrasive Flow Machining", National Conference on Recent Innovations in Production Engineering, RIPE - 2010, MIT Campus - Anna University Chennai, April 16-17, 2010, pp. B 97-100. 

16.

Rajesha S., Sharma A. K, Kumar Pradeep, (2010), "Effect of Process Parameters on Performance of WEDM while Machining Inconel 718", Proceeding: International Conference on Frontiers in Mechanical Engg, FIME-2010, NITK, Surathkal, May 20-22, 2010, pp. 162-167.

17.

Rajesha S., Sharma A.K, Kumar Pradeep, (2010), "Development and Performance Evaluation of Alternative Media for Abrasive Flow Machining Proceeding: Intr. Conference on Frontiers in Mech. Engg, FIME-2010, NITK, Surathkal, May 20-22, 2010, pp. 168-173.

18.

Rajesha S., A. K. Sharma, Kumar Pradeep, (2010), "Some Aspects of Surface Integrity Study of Electro Discharge Machined Inconel 718",Proceedings of the 36th International MATADOR Conference,  The University of Manchester, United Kingdom, July 14-16, pp. 439-444.

19.

Rajesha S., A.K Sharma, and Kumar Pradeep, (2010), "Surface Integrity Evaluation of Electro Discharge Machined Inconel 718", 3rd International and 24th AIMTDER-2010, Andhra University, Visakhapatnam December 13-15, 2010, pp. 259-264. 

20.

Rajesha S., G. Venkatesh, Apurbba Kumar Sharma, and Kumar Pradeep, (2010), "Performance Evaluation of a Newly Developed Media for AFM Using Taguchi’s", Orthogonal Arrays”, 3rd International and 24th AIMTDER-2010, Andhra University, Visakhapatnam, December 13-15, 2010, pp. 1187-1192.

21

Rajesha S., A. K. Sharma, Kumar Pradeep, (2010), "Influence of Process Parameters on Material Removal Rate While EDMing Inconel 718", Second International Conference CPIE 2010, NIT Jalandhar, 3-5 December, 2010, pp. 733-737.

22.

Rajesha S., Sharma A. K., Kumar Pradeep, (2009), " Hybrid Abrasive Flow Machining Process: A Brief Review" Proc. National Conference on Recent Advances in Mechanical and Production Engineering RAMP 2009, College of Technology, Pantnagar, February 12-14, 2009, pp 366-374.

23

Rajesha S, S.N. Srivastava (2007), "Artificial Intelligence Techniques for Reliability Centered Maintenance - An Exploratory Study", First International Conference CPIE 2007, NIT Jalandhar, 22-24 March, pp. 533-541.

 

 

 

No National Conferences Found.

Workshop / Seminars

SN

Events

1

FDP - Manufacturing world & its Future, Sponserd By Dr. AKTU, Loucknow. (2 to 7 Apr 2018)

2

FDP - 'Effective Curriculum Implementation' ICT association with NTTTR, Chandigarh. (7 to 11 Mar 2016). 

3

Brainstorming Session - I ‘Industry Institute Interaction to Curriculum Development' (7  April 2016) for development of new LTP and Syllabus - Academic Year 2016-17 Onward.

4

Brainstorming Session - I ‘Industry Institute Interaction to Curriculum Development' (13 April 2016) for development of new LTP and Syllabus - Academic Year 2016-17 Onward.

5

Brainstorming Session - I ‘Industry Institute Interaction to Curriculum Development' (17 April 2016) for development of new LTP and Syllabus for Dr. AKTU, Lucknow- Academic Year 2016-17 Onward.

6

Workshop; "Two Day workshop of Curriculum Development" development of new LTP (CBCS) and Syllabus for Dr. AKTU, Lucknow. 23-24 April 2016.

 

Projects and Exhibitions

No Projects and Exhibitions Details Found.

Other Activities

No Other Activities Details Found.